|Product Name:||MIG Welding Robot||Max Moving Radius:||1400mm|
|Robot Accuracy:||0.07mm||Max Payload:||10 KG|
|Body Weight:||185KG||Warranty:||1 Year|
automatic welding machine,
electric welding machine
MIG welding robot special technical indicators
1. Suitable welding or cutting methods. This is especially important for arc welding robots. This essentially reflects the ability of the robot control and drive system to resist interference. At present, general arc welding robots only use the gas metal arc welding method, because these welding methods do not need high frequency arc starting welding, the robot control and the driving system have no special anti-interference measures, and can be used for arc welding of tungsten argon arc welding. The robot is a new product in recent years, and it has a special anti-interference measure. This should be taken care of when choosing a robot.
2. Swing function. This is very important for arc welding robots, which is related to the process performance of arc welding robots. Now the arc welding robot's swing function is very different. Some robots only have a fixed number of swing modes. Some robots can only set the swing mode and parameters in the xy plane. The best choice is in space (xy, z) Set the swing mode and parameters arbitrarily within the range.
3. Welding household point teaching function. This is a very useful function in welding teaching, that is, when welding teaching, first teach the position of a certain point on the weld, and then adjust its welding gun or welding tongs posture, When the posture is adjusted, the position of the original teaching point is completely unchanged. Actually, the robot can automatically compensate for the change in the position of the household caused by the adjustment posture, and ensure the coordinates of the household point to facilitate teaching the operator.
4. Welding process fault self - test and self - processing function. This refers to common welding process failures, such as arc welding, broken wire, spot welding, sticky electrodes, etc. If these failures occur, if measures are not taken in time, A major accident such as a damaged robot or a scrapped workpiece occurs. Therefore, the robot must have the function of detecting such faults and automatically stopping the alarm in real time.
5. Arc ignition and arc closing function To ensure the welding quality, the parameters need to be changed. In robot welding, it should be set and modified during teaching, which is an essential function of the arc welding robot.
Mig welding robot body specification
|Robot model||ZK1400 - 06|
|Mounting||Vertical ground installation|
|Number of axes||6|
|Max working radius||1400mm|
|Repeated posiontioning accuracy||0.03mm|
|Maximum joint range||J1||RV reducer ±160°|
|J2||RV reducer +110°, -70°|
|J3||RV reducer +65°, -120°|
|J4||RV reducer ±150°|
|J5||Hollow harmonic reducer +105°, -110°|
|J6||Hollow harmonic reducer ±320°|
|Maximum joint speed||J1||RV reducer 201.9°/S|
|J2||RV reducer 198.3°/S|
|J3||RV reducer 198.3°/S|
|J4||RV reducer 296.2°/S|
|J5||Hollow harmonic reducer 197.5°/S|
|J6||Hollow harmonic reducer 247.2°/S|
|Allowable bending moment N.m||J4||RV reducer 9.8N.m|
|J5||RV reducer 9.8N.m|
|J6||Hollow harmonic reducer 4N.m|
|Allowable inertia Kg.㎡||J4||RV reducer 0.3kg.㎡|
|J5||RV reducer 0.3kg.㎡|
|J6||Hollow harmonic reducer 0.05kg.㎡|
|Body total weight||KG||185KG|
Keep away from corrosive gases or liquids or explosive gases,
|Power capacity||6KVA (Robot) + 24KVA (Welding source)|
Advantages of our company
Shanghai Genius Industrial Co.,Ltd is the overseas sales service center of Nantong Zhenkang Welding Electromechanical Company, which was established in 1993, have more than 20 years of history in the welding industry.
Our company professionally manufacture wire feeder, RV gear reducer and industrial robot, which is engaging in research and development, manufacture and sell.
At present, our company occupies an area of 32,000 square meters, with a plant area of 25,000 square meters. It has 72 senior technicians, 42 technicians directly researching and developing, and total assets of 100 million CNY.
Company has advanced and sophisticated manufacturing equipments and testing instruments, CNC machine tools, machining centers, slow wire cutting machines and other equipment more than 200 units; strict quality assurance system, complete testing means; has developed into production CNC, Intelligent assembly and office automation, have realized the advanced ERP management and first - class production site of modern enterprises. The strict ISO9001 and ISO14001 system certifications provide a powerful guarantee for the company to produce high - quality wire feeders, RV reducers and industrial robots.
Contact Person: Daisy He