|RV-C:||10C/ 27C/ 50C/100C/120C/200C||Name:||RV Gearbox|
|Type:||Cycloidal Pinwheel Planetary Gearbox||Reduction Gear Ratio:||Big Speed Ratio|
Planetary Hollow Shaft Cycloidal Gearbox,
Servo Motor Planetary Cycloidal Gearbox,
ISO Mechanical Reduction Cycloidal Gearbox
At present, Japan's precision cycloid gear RV reducer has been widely used in mechanical reduction gears for production process equipment in various industries, and is highly praised by users.
It is the current modern industrial equipment to achieve large torque, high speed ratio, low noise, and high stability mechanical reduction transmission The best choice for control devices.
Nabtesco of Japan is the world's largest manufacturer of precision cycloidal pinwheel RV reducers, and produces high-performance reducers, hollow shaft reducers, and single-axis servo actuators and controllers. The precision equipment produced by it has high torque, high rigidity and high resistance to overload and impact load capacity, as well as high precision and very low return clearance.
The largest and most professional manufacturer of precision cycloidal pinwheel reducers in China is Genius Robotics Zhenkang. The size, speed ratio, accuracy and noise of the precision cycloidal pinwheel RV gear reducers produced by it are completely the same as Nabtesco, and the price is half cheaper. The price/performance ratio is very high.
Genius Robotics Zhenkang produces a full range of precision cycloid gear RV reducers including RV-E series, RV-20E, RV-40E, RV-80E, RV-110E, RV-160E, RV-320E.
Hollow type RV-C series RV-10C, RV-27C, RV-50C, RV-100C, RV-120C, RV-200C, RV-320C
1. A variety of installation methods can be used according to actual requirements, and multiple surfaces can be installed;
2, the installation must be firm and reliable;
3. The working mechanisms of the prime mover and precision reducer must be carefully aligned, and the error shall not be greater than the allowable compensation of the coupling used;
4. After installation, turn it by hand, and it must be flexible and free from jamming.
The use and maintenance of the precision cycloid gear RV reducer is an important link to ensure the normal operation of mechanical equipment. Therefore, when you install the precision cycloid gear RV reducer, please strictly follow the following installation sequence and carefully assemble it.
Step 1: Before installation, confirm whether the motor and the reducer are intact, and strictly check whether the dimensions of the connecting parts of the drive motor and the reducer match. This refers to the size and matching tolerance between the positioning boss and shaft diameter of the drive motor flange and the positioning groove and aperture of the reducer flange; the dirt and burrs on the mating surface are wiped and treated.
Step 2: Unscrew the screw plug on the process hole on the side of the flange of the reducer, rotate the input end of the reducer, align the holding hexagon socket screw cap with the process hole, insert the hexagon socket tool to loosen and tighten the hexagon socket screw .
Step 3: Hold the drive motor so that the keyway on the shaft is perpendicular to the screw in the input end hole of the reducer, and insert the drive motor shaft into the input end hole of the RV reducer. When inserting, it must be ensured that the concentricity of the two is the same and that the flanges on both sides are parallel. If the degree of concentricity is inconsistent or the two flanges are not parallel, the cause must be investigated. In addition, during installation, hammering is strictly prohibited, which can prevent excessive axial force or radial force from damaging the bearings of the two bearings, and judge whether the two are matched properly by the assembly feel. The method of judging the concentricity of the two and the parallelism of the flanges is: after the two are inserted into each other, the flanges of the two are basically tight and the gap is the same.
Step 4: In order to ensure that the two flanges are connected evenly, first screw the fastening screws of the drive motor arbitrarily, but do not tighten them; then gradually tighten the four fastening screws according to the diagonal position; then tighten the reducer Hold the screw in the input end hole. Be sure to tighten the fastening screws of the drive motor first, and then tighten the screws at the input end of the RV reducer.
If you need to purchase or consult, learn more about the precision cycloidal pinwheel RV gear reducer, please feel free to consult and contact firstname.lastname@example.org,
whatsapp: +86 15800366487
Contact Person: Daisy He